Table of Contents
Advertisement
Quick Links
Operating Instructions and Parts Manual
SPECIFICATIONS
POWER SUPPLY REQUIREMENTS
MOTOR
HORSEPOWER
CIRCUIT REQUREMENT
© 2019, WAYNE/Scott Fetzer Company
120 V, 60 Hz
Single Phase, Auto ON/OFF
1/4 HP
15 A (minimum)
PERFORMANCE
Model
HP
Discharge Head
WPCP250
1/4
Auto On-Off Water Removal
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
MOTOR HOUSING
MOTOR SHAFT
IMPELLER
VOLUTE
PUMP DISCHARGE
0 ft.
5 ft.
Gal/hr
1900
1580
www.waynepumps.com
Pool Cover Pump
CONSTRUCTION
Thermoplastic
Stainless Steel
Thermoplastic
Thermoplastic
3/4 in. Hose Threads
10ft.
15 ft.
20 ft.
1250
850
350
690002-001 B 11/19
WPCP250
Advertisement
Table of Contents
Related Manuals for Wayne WPCP250
Summary of Contents for Wayne WPCP250
- Page 1 CIRCUIT REQUREMENT 15 A (minimum) VOLUTE Thermoplastic PUMP DISCHARGE 3/4 in. Hose Threads PERFORMANCE Model Discharge Head 0 ft. 5 ft. 10ft. 15 ft. 20 ft. WPCP250 Gal/hr 1900 1580 1250 © 2019, WAYNE/Scott Fetzer Company www.waynepumps.com 690002-001 B 11/19...
- Page 2 Operating Instructions and Parts Manual STEP 1 - VERIFY PACKAGE CONTENTS STEP 5 - PLUG INTO GFCI OUTLET 25’ POWER CORD 25’ ROPE HANG LOOP STAINER BASE CARRYING DISCHARGE HANDLE STEP 2 - CONNECT GARDEN HOSE FOR FURTHER PLACEMENT TECHNIQUES AND DETAILED INSTALLATION FOR INGROUND AND ABOVE GROUND POOL APPLICATIONS, REFER TO PAGES 5 and 7- FIGURES (A-E).
-
Page 3: Important Safety Instructions
Operating Instructions and Parts Manual WPCP250 IMPORTANT SAFETY INSTRUCTIONS DESCRIPTION When installing and using this electrical equipment, basic This portable, Auto On-Off Pool Cover pump is designed for safety precautions should always be followed, including the automatic removal of water, from a pool or spa cover. The units are following: equipped with a 25 ft. -
Page 4: General Safety Information
Operating Instructions and Parts Manual GENERAL SAFETY INFORMATION To reduce the risk of electric shock, replace damaged cord immediately. CALIFORNIA PROPOSITION 65 Pour réduire le risque de choc électrique, relachez immédiatement le cordon endommagé. To reduce the risk of electric shock, do not This product can expose you to chemicals, including DEHP, use extension cord to connect unit to electric supply;... -
Page 5: Application And Operation
Operating Instructions and Parts Manual WPCP250 GENERAL SAFETY INFORMATION (CONT’D) APPLICATION AND OPERATION Do NOT use pump if ANY part is cracked, Risque de choc électrique! Le disjoncteur de broken, or missing. fuite à la terre fournira une protection uniquement contre les défauts entre les lignes et les fuites à... - Page 6 Operating Instructions and Parts Manual APPLICATION AND OPERATION (CONT’D) 7. The pump will stop automatically once water has been removed to a depth of approximately 1/2 of an inch. The pump will not PUMPING HEIGHT restart until the water depth rises to 1-5/8 inches or greater. When water is pumped to an elevated position, any volume that has 8.
- Page 7 Operating Instructions and Parts Manual WPCP250 ABOVE GROUND PUMP INSTALLATION To aid in pump placement on pool cover, secure provided 25 ft. rope to the pull to shore loop (Figure B). FEED ROPE THROUGH LOOP AND SECURE WITH KNOT 25 FT.
-
Page 8: Maintenance
Operating Instructions and Parts Manual MAINTENANCE TROUBLESHOOTING 1. To verify pump is operating correctly follow the steps below: a. Disconnect pump from power source. Pump starts automatically. Always disconnect b. Follow periodic cleaning steps. electric supply before attempting to install, service, relocate, or perform c. -
Page 9: Troubleshooting Chart
Operating Instructions and Parts Manual WPCP250 TROUBLESHOOTING (CONT’D) 5. When temperatures drop below freezing, remove pump from service and store indoors to protect pump from damage due to ice. The pump has a unique protection circuit to protect the motor from a locked impeller condition possibly caused by debris buildup or from a “frozen”... - Page 10 LIMITED WARRANTY For three years for WPCP250 model from the date of purchase, from an authorized dealer, Wayne Water Systems will repair or replace, at its option for the original purchaser, any part or parts of its Pool Cover Pump or Water Pumps (“Product”) found upon examination by Wayne Water Systems to be defective in materials or workmanship.
- Page 11 Operating Instructions and Parts Manual WPCP250 NOTES www.waynepumps.com...
- Page 12 NOTES www.waynepumps.com...
Need help?
Do you have a question about the WPCP250 and is the answer not in the manual?
Questions and answers