Vision Sensor Setting - Mitsubishi Electric MELSENSOR VS20 Connection Manual

2.2

Vision Sensor Setting

Setting an IP address to the personal computer
Set the IP address 192.168.3.3 to the personal computer.
Connecting of the vision sensor
Start In-Sight Explorer to set the vision sensor.
1.
Start the In-Sight Explorer software.

2.
Add the vision sensor to the network.


 Click [Add].
 Add the sensor and device to the
network as shown left.
• IP Address: 192.168.3.1
• Subnet Mask: 255.255.255.0
 Click [Apply].
2 I/O CONNECTION
2.2 Vision Sensor Setting
2
33