Fig. 10
Fig. 11
Fig. 12
Anti-Crush System
This is not an operator control but a function built into
the Sara Flex electronics.
Great care should be taken not to lower the lifting
arm onto the patient or any other obstruction. If this
should happen, the Sara Flex "anti-crush" system will
engage, stop the motor and all downward movement
will cease. If this occurs, release the "down" button
immediately and press the "up" button to raise the
lifting arm until the lift is clear.
Then remove the obstruction.
Allowed Slings with Sara Flex
The following slings are compatible with Sara Flex.
Active Slings (See Fig. 10)
• TSS.500 (S)
• TSS.501 (M)
• TSS.502 (L)
• TSS.503 (XL)
• TSS.504 (XXL)
Flites
• MFA3000 (Flite)
Transfer Sling (See Fig. 11)
• TSS.511 (Transfer Sling Model, only to be used
with Central Hook)
For sling selections see respective sling IFU.
Central Hook (Accessory)
Only to be used with the transfer sling. The central
hook (See Fig. 12) is to be installed right under the
lifting arm by quali ed personnel only.
13