Cautions On Using Fa Transparent Function In Got1000 Series - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition
5.4

Cautions on using FA transparent function in GOT1000 Series

When monitoring circuits, device monitor, etc. or reading/writing programs in an FX
using the FA transparent function by way of USB in the GOT1000 Series, make sure to execute the following
setting.
1. Double-click the Connection Destination view → [Connection Destination] → [(Connection
target data name)] in the Navigation window of GX Works2.
The [Transfer Setup Connection1] is displayed.
2. Double-click [Serial USB] of the PC side I/F to display [PC side I/F Serial Setting].
3. Select [USB].
4. Double-click [GOT] of the PLC side I/F to display [PLC side I/F Detailed Setting of GOT].
5. Select [FXCPU], [via GOT[direct coupled] transparent mode].
6. Click the [OK] button to finish the setting.
46
Double-click it.
5 Version Information and Peripheral Equipment Connectability
5.4 Cautions on using FA transparent function in GOT1000 Series
Select [USB]
Select [FXCPU]
Select
[via GOT[direct coupled] transparent mode]
PLC from GX Works2
3GC