Mitsubishi Electric MELSEQ FX3S Series User Manual page 167

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition
3. Test mode operation
1) Press the [OK] button once in the monitor mode to change the current
value.
Press the [OK] button twice in the monitor mode to change the set
value.
2) Use the [+] / [-] buttons to change the value as desired.
Press and hold the [+] or [-] button for 1 second or more to increase or decrease the value at high speed.
3) Press the [OK] button to determine the input. At this time, the input data is written to the PLC.
Case of resetting the current value
When the [OK] button is pressed and held for 2 seconds or more while the
current value is being changed, the current value is reset to "0", and the
character "R" and current value "0" start to blink.
Press the [OK] button while "R" and the current value are blinking to write
the current value "0" to the PLC, turn OFF the contact, and return to the
monitor mode.
16 Display Module (FX3S-5DM)
16.5 Monitor/Test
Changing the current value
Resetting the current value
161
11
12
13
14
15
16
17
A
B
C