Safety Precautions - Huawei PDU8000-0125DCV8-BXA006 User Manual

Bcb box
Table of Contents

Advertisement

PDU8000-(0125, 0250, 0400, 0630) DCV8-BXAXXX
BCB Box
User Manual
Only qualified and trained personnel are allowed to operate and maintain the BCB box.
To ensure human safety and normal BCB box operation, ground the BCB box before use.
The ground cable must be capable of bearing fault currents.
Components under the isolation board inside the BCB box are not operable. Do not open
the cover. Otherwise, electric shocks may occur, and the resulting faults are beyond the
warranty scope.
During battery installation, ensure that the positive and negative copper bars are not short
circuited. Short circuits can cause a fire and result in personal injury.
The operating and storage environments affect the BCB box service life and reliability.
Therefore, the environments must meet the requirements specified in this document.
Install the BCB box in compliance with the local laws and regulations.
Reserve sufficient space in front of the BCB box to facilitate maintenance.
Prevent liquid or other foreign matter from entering the BCB box. Do not place containers
with liquid near the BCB box.
Perform electrical connection to a specified torque.
To avoid damages, move the BCB box gently.
Before operating batteries, carefully read the safety precautions for battery handling and
connection.
The BCB box may cause electric shocks and high short-circuit currents. Therefore, before
operating the BCB box, get tools insulated, and take off metal articles such as watches and
rings.
In case of fire, use a dry power fire extinguisher to put out the fire. Using a fluid fire
extinguisher may cause electric shocks.
Do not install a switch and other disconnection devices on the ground cable.
Issue 01 (2019-03-07)
1
Copyright © Huawei Technologies Co., Ltd.

Safety Precautions

1 Safety Precautions
1

Advertisement

Table of Contents
loading

Table of Contents