Data Carrier Installation - Omron V600 Series Operation Manual
R/w heads and data carriers, built-in battery (sram memory) models, large-capacity battery-less models
Hide thumbs
Also See for V600 Series:
- User manual (167 pages) ,
- Operation manual (115 pages) ,
- Manual (36 pages)
Table of Contents
Advertisement
Data Carrier Installation
4-2
Data Carrier Installation
V600-D8KR12D/KR13/KR04/KF04 Data Carriers
Installation Method
V
6
0
- 0
D
8
K
V600-D8KR04/V600-D8KF04
Mounting in Metal Casing
Use M4 screws and spring washers for DC installation. Tighten the screws to a
torque of 0.7 to 1.2 N m (approximately 7 to 12 kgf cm).
There are no restrictions on the mounting direction or the direction with respect
to the R/W Heads.
R
1
2D
Two, M4
Four, M4
V600-D8KR12D
V600-D8KR13
The V600-D8KR12D and V600-D8KR13 DCs can be either surface-mounted or
flush-mounted. When flush-mounted in metal, the top of the DC must not be
lower than the surface of the metal casing.
V600-D8KR04
x (mm)
Flush-mounted in metal casing
V
6
0
Flush-mounted
17.5 mm max.
Metal
Flush-mounted
10 mm max.
Metal
x (mm)
Flush-mounted
Metal
- 0
D
8
K
R
1
3
Two, M4
Surface-mounted
Surface-mounted
Surface-mounted
20 mm max.
Surface-mounted on metal
Section
4-2
Metal
Metal
Metal
31
Advertisement
Chapters
Table of Contents
