Darwin Fitness CT40 Assembly And Operating Instructions Manual page 18

Step 6:
1. Connect the handpulse cables (13) with the corresponding cables of the console (64). Plug the
upper console cable (29) into the console (64). Now put any excess cable into the opening of the
handlebar post (10) before you place the console (64) on top. Be careful not to pinch the cables.
Now assemble the console (64) on the handlebar post (10), using four cross bolts (90).
2. Assemble the left and the right pedal (20L & 20R) on the pedal supporting tubes (11), using four
square bolts (20), four flat washers (73) and four knobs (77).
3. Fix the bolt covers (74 & 75).
4. Plug the adaptor (97) into the training machine and connect it to the power supply - see detail
drawing. Only use the provided original adaptor.
18
CT40