Assembly - Darwin Fitness CT40 Assembly And Operating Instructions Manual

2.3

Assembly

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
1. Assemble the front stabilizer (2) and the rear stabilizer (19) on the main frame (1), using four
allen bolts, four curved washers (6), four spring washers (7) and four domed nuts (8).
2. Compensate any uneveness in the floor, using the adjustable foot caps (4) – see detail drawing.
13