UPS2000-G-(6 kVA-20 kVA)
User Manual
Butt
on
i
4.4 LCD
The LCD displays the UPS running data and alarm information, and allows you to set
parameters and control operation. The backlight turns off if you do not press any button
within 30 seconds.
4.5 LCD Startup Screens
Table 4-3 Symbol conventions
Symbol
Issue 13 (2019-05-05)
Meaning
Fault indicator/INFO
button
Battery self-check: After the UPS starts in normal mode, it transfers to battery mode for 10 seconds
to check that the battery status (if no battery is connected, No battery is displayed) and that the UPS
can transfer to battery mode. The purpose is to prevent power backup failure when the UPS needs to
transfer to battery mode.
If you do not press any button within 60 seconds, the default screen is displayed.
Copyright © Huawei Technologies Co., Ltd.
Description
On the default screen, press
menu is displayed.
On any menu screen, press
lower-level menu is displayed. If the menu is the
last level, an information screen is displayed.
On the default screen in normal mode, hold down
for more than 5 seconds. Release the
button when you hear a beep sound. The battery
test starts.
When the buzzer buzzes, hold down
2–5 seconds. The buzzer is muted when you
release the button.
When an alarm is generated, press i to view the
active alarm information.
When no alarm is generated, press i to return to
the default screen.
Description
Press A.
Press B after you press A.
Indicates omitted screens.
4 Control Panel
. The main
. The
for
38