General Information - ADJ POCKET PRO User Manual

Pocket Pro
Unpacking: Thank you for purchasing the Pocket Pro by ADJ Prod-ucts, LLC. Every Pocket Pro has
been thoroughly tested and has been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your fixture for any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are missing, please contact our toll
free customer support number for further instructions. Please do not return this unit to your dealer
without contacting customer support first.
Introduction: The Pocket Pro is a DMX intelligent, moving head, mini LED fixture. The Pocket Pro can
operate as a stand alone fixture or in a Primary/Secondary configuration. The Pocket Pro has three
operating modes; a sound active, show mode, DMX controlled. This fixture is suitable for theaters,
studios, retail stores, and other similar locations. For best results use fog or special effects smoke to
enhance the beams projections.
Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide help and
to answer any question should you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are
Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
Voice:
Fax:
E-mail:
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times!
ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 3
(800) 322-6337
(323) 582-2941
support@adj.com

General Information