Internal View; Labels And Pictograms - Teledyne OLCT 60 User Manual

1.4 Internal view

Id.
1. Electronic circuit board
2. Terminal block

1.5 Labels and pictograms

The detector has two identification labels, as shown below:
1.5.1 Certification label
Id.
1. ATEX marking
2. Type of product
3. Manufacturer's name
4. Marking and certification temperature range in
Hazardous area (is not the operating temperature range)
5. Warning
6. CE and ATEX marking
1.5.2 P/N label
This label is located on the side of the enclosure and contains the following information:
Id. Description
1. Part Number of the OLCT 60 without sensor
2. Disposal icon
3. Serial Number : The first two digits (in this case 10)
correspond to the year of manufacture (in this case
2010)
NPO60GB
Revision F.2
Description
Description
OLCT 60
FIXED POINTGAS MONITOR
USER MANUAL
Figure 4: Detector internal
view (with display board
removed)
Figure 5: Certification label
Figure 6: Side label
5