Overview - Teledyne OLCT 60 User Manual

1

Overview

OLCT 60 gas detectors are 4-20mA and 3-wire transmitters designed for measuring combustible
and toxic gases as well as oxygen.
OLCT 60 is available in two versions:
• Flameproof certified enclosure along with flameproof certified sensor block. This version
is listed as OLCT 60d.
• Flameproof certified enclosure along with intrinsically safe certified sensor block. This
version is available for electrochemical sensors only. This version is listed as OLCT 60id.
Available versions are listed below.
Catalytic sensor
Electrochemical sensor
Remote detector type GD10P
Each version features two options:
• OLCT 60 version with on-board sensor. The sensor can either be flameproof or
intrinsically safe certified depending on the version of the detector.
• OLCT 60D version with remote sensor. The sensor can either be flameproof or intrinsically
safe certified depending on the version of the detector.
Available combinations are listed below.
Name
OLCT 60 Flameproof enclosure with on-
board sensor (FLP or IS*)
OLCT 60D Flameproof enclosure with remote
sensor 15m (FLP or IS*)
NPO60GB
Revision F.2
OLCT 60d
Table 1: Comparison of OLCT 60 detectors
Description
OLCT 60
FIXED POINTGAS MONITOR
USER MANUAL
OLCT 60id
Illustration
1