How To Froth Milk; Dispensing Hot Water - Gaggia Milano NAVIGLIO MILK User Manual

MAN. GAG. NAVIGLIO MILK USA EN.indd 19
5 Press the " " button to stop dispensing milk. Press the "
finish the coffee brewing process.
After frothing the milk, clean the Capp in Cup system by dispensing a small
amount of hot water, as described in the "Cleaning and Maintenance" chapter, and
rinse the spout with fresh water.

How to Froth Milk

The classic Pannarello, included as a standard accessory in the machine
packaging, allows to froth milk through the steam function;
1 Fill 1/3 of a carafe with cold milk.
2 after removing the Capp in Cup system handle, insert the classic Pannarello
using the handle on the steam wand.
3 Select the " " button.
4 Whilst the machine is heating up, the "
5 The machine starts dispensing steam when the "
" button turns off.
6 Froth milk by gently swirling the container and moving it up and down.
7 When milk froth has reached the desired consistency, press the "
stop steam dispensing.

Dispensing hot water

Warning: Danger of burning! Dispensing may be preceded by small jets of hot wa-
ter. The steam/hot water wand may reach high temperatures: never touch it with
bare hands. Use the appropriate protective handle only.
Before dispensing hot water, check that the "
are permanently on and that the water tank is full.
ENGLISH
" button again to
" and " " buttons flash.
" remains on and the "
", " ", " " and " " LED lights
05/11/2019 11:37:48
19
" button to