Energy Saving; Stand-By - Gaggia Milano NAVIGLIO MILK User Manual

ENGLISH
38
Machine actions
The machine grinds coffee
beans but no coffee comes
out.
(see note)
Coffee is dispensed slowly.
(see note)
Coffee leaks out of the
dispensing spout.
Milk does not froth.
Frothed milk is too cold.
MAN. GAG. NAVIGLIO MILK USA EN.indd 38
Causes
There is no water.
The brew group is dirty.
The circuit is not primed.
This might occur when the
machine is automatically
adjusting the dose.
The dispensing spout is dirty.
The coffee grind is too fine.
The circuit is not primed.
The brew group is dirty.
The dispensing spout is clogged.
The Capp in Cup system is
inserted too deep. No milk is being
suctioned.
The cups are cold.

Energy saving

Stand-by

The super-automatic Gaggia espresso coffee machine is designed for energy
saving.
After 30 minutes of inactivity, the machine turns off automatically. If a product has
been brewed, the machine performs a rinse cycle.
In stand-by mode, the energy consumption is below 1Wh.
To turn on the machine, press this button (if the power button on the back of the
machine is set to "I"). If the boiler is cold, the machine performs a rinse cycle.
Solutions
Fill the water tank and prime the circuit
(see the "Using the Machine for the First
Time" chapter).
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Brew some cups of coffee as described
in the "Gaggia Adapting System" chapter.
Clean the dispensing spout.
Change coffee blend or adjust grinding
as explained in the "Adjusting the
Ceramic Coffee Grinder" chapter.
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
Clean the dispensing spout and its
holes.
Allow the Capp in Cup system to cool off.
Move it slightly downwards. Reposition it
in its correct seat.
Preheat the cups with hot water.
05/11/2019 11:38:09