Dispensing Milk-Based Coff Ee Beverages And Milk Froth; Filling The Milk Carafe; Inserting The Milk Carafe - Gaggia Milano ANIMA CLASS Series Operating Instructions Manual

Dispensing milk-based coff ee beverages and milk froth

Filling the Milk Carafe

Inserting the Milk Carafe

Warning: before selecting a milk-based coff ee beverage or milk froth, ensure
the milk carafe is installed and the milk dispensing spout is open. If the milk
carafe is not correctly installed, the milk dispensing spout may spray steam or
hot milk.
Before using the milk carafe, clean it thoroughly as described in the
"Cleaning and Maintenance" chapter.
The milk carafe can be fi lled before or during use.
1 Lift the lid of the milk dispensing unit.
2 Pour the milk into the milk carafe: the milk level must be between the
minimum (MIN) and the maximum (MAX) level indicators shown on the
carafe. Put the lid back on.
If installed, remove the water dispensing spout:
1 Press the two side buttons to unlock the dispensing spout and lift it
slightly.
2 Pull the water dispensing spout to remove it.
3 Slightly tilt the milk carafe. Insert it all the way into the guides of the
machine.
4 Push the carafe downwards while rotating it at the same time until it is
locked onto the drip tray.
Do not force the carafe while inserting it.
English
17