Gaggia Milano NAVIGLIO MILK User Manual page 31

MAN. GAG. NAVIGLIO MILK USA EN.indd 31
1 Empty the drip tray and place it back. Remove the INTENZA+ filter (if fitted).
2 Remove the Capp in Cup system from the steam/hot water wand.
3 Remove and empty the water tank. Pour in the entire content of the
Gaggia descaling solution.
4 Fill the water tank with fresh water up to the CALC CLEAN level. Put the water
tank back into the machine.
5 Place a large container (1.5 l) under the steam/hot water wand and the
dispensing spout.
6 Press and hold the
flashing, release it to start the cycle.
The button flashes during the whole descaling cycle.
7 The machine starts dispensing the descaling solution from the steam/hot
water wand (the " " button glows steady) and from the dispensing spout (the
" " button glows steady), at intervals of about 1 minute.
8 When the descaling solution is finished, the
" " button flashes.
9 Empty the container and place it back under the steam/hot water wand and
under the dispensing spout.
10 Remove the water tank, rinse it and fill it up with fresh water up to the MAX
level.
Place the water tank back into the machine.
11 Empty the drip tray and place it back. Insert the
container.
" button for 3 seconds. When the button starts
LED light turns on and the
ENGLISH
31
05/11/2019 11:38:03