Table of Contents
Advertisement
SECTION 5 – MAINTENANCE SCHEDULE AND SERVICE PROCEDURES
GOVERNMENT REGULATION: Engine fluids
(oil, fuel, and coolant) may be a hazard to human
health and the environment.
other contaminated materials (e.g.
accordance with applicable regulations.
or dispose of engine fluids, filters, and other
contaminated materials according to applicable
regulations.
WARNING
To prevent personal injury or death, wear
protective clothing when draining hot oil.
WARNING
To prevent personal injury or death, do not let
engine fluids stay on your skin. Clean skin and
nails using hand cleaner and wash with soap
and water. Wash or discard clothing and rags
contaminated with engine fluids.
Page 70
Handle all fluids and
filters, rags) in
Recycle
1. Park the vehicle on level ground. Set the parking brake and
shift the transmission to park or neutral.
2. Before attempting to open the centrifuge oil filter, wait 2
minutes to assure the rotor has stopped spinning.
NOTE: When separating the cover assembly from the body
assembly, it may be necessary to insert a coin or flat blade
screwdriver in to the gap to start the separation.
3. Turn the band clamp handle counter clockwise until the tee
bolt head can be disengaged. Remove band clamp.
4. Remove the cover and rotor assembly from the body
assembly.
Advertisement
Table of Contents
