Table of Contents
Advertisement
SECTION 5 – MAINTENANCE SCHEDULE AND SERVICE PROCEDURES
15. After engine reaches normal operating temperature and
the thermostat has opened, allow engine to run for 5 to 10
minutes, then shut engine off.
16. Connect
electrical
connector
recirculation (EGR) valve. Clear any Diagnostic Trouble
Codes (DTC) that may have occurred. See the Engine
Diagnostic Manual for further information.
WARNING
To prevent personal injury or death, do the
following when removing the radiator cap or
coolant tank cap:
•
Allow the engine to cool for 15 minutes or more.
•
Wrap a thick cloth around the radiator cap or
coolant tank cap.
•
Loosen cap slowly a quarter to half turn to vent
pressure.
•
Pause for a moment to avoid being scalded by
steam.
•
Continue to turn cap counterclockwise to
remove.
17. If necessary, add coolant to the coolant tank to bring the level
up to the COLD MAX mark.
Page 86
at
the
Exhaust
Gas
Advertisement
Table of Contents
