Section 3 - Instruments, Indicators, And Switches; Instrument Panel Gauge Cluster; Warning Lights; Wait To Start Lamp - Navistar MaxxForce DT Operation And Maintenance Manual

SECTION 3 – INSTRUMENTS, INDICATORS, AND SWITCHES

Instrument Panel Gauge Cluster

During engine starts and engine operation, gauges and indicator
lamps should be checked periodically.
Gauges may vary with vehicle applications.
indicator lamps show conditions not indicated by the gauges.
This manual does not describe indicator lamps for the drivetrain,
chassis components, or cab interior. See the Vehicle Operator
Manual.

Warning Lights

Warning lights signal when a reading is outside preset limits.
• Warning lamps indicate situations that must be inspected
before operating the vehicle.

Wait to Start Lamp

Warning and
Figure 11 Wait to Start Lamp.
The WAIT TO START lamp will illuminate when inlet air heater
is required. Wait until the lamp goes off before starting engine.
See Starting the Engine (page 47) for further information.
Page 35