Description; Main Functions - Bticino Sfera Installer Manual

2 Description

2.1

Main functions

The BTicino Sfera Proximity Reader enables residents to open a door lock using univocal codes,
read by appropriate badges.
The device consists of an antenna used for reading the badge (transponder), and luminous and
sound indicators for the control of the correct storage of the codes inside the badge. The transmis-
sion of the codes takes place when the badge is placed near the proximity reader.
Programming can be performed in two ways:
- using the TiSferaDesign software supplied with the product (chapter 4);
- using specific procedures to be performed using the reader (chapter 3).
To save the manager master codes remove the front cover and press the programming
pushbutton indicated in the legend (chapter 2.2). Once the badges have been saved in the reader,
opening of the door lock will be possible.
Four types of badges may be programmed:
- MANAGER MASTER
- APARTMENT MASTER
- PASSEPARTouT
- RESIDENTS
Note: when switched on for the first time, the Proximity Reader has no preset badges.
Badge providing access to the programming of other codes.
It can only be used for programming, not for access.
Once the apartment badge has been defined, this can be used to
program the badges of the resident of that apartment.
It can only be used for programming, not for access.
It can be used to open the door lock the entrance panel is associated to.
It's not linked with any apartments.
It can only be used for access, not for programming.
It can be used to open the door lock the entrance panel is associated to.
It's linked to an apartment of the system.
It can only be used for access, not for programming.
Sfera Proximity Reader
M= 00 managing residents
using the manager
master.
M= 01 managing residents
using the apartment
master.
5