Trainmaster Command Control Operations; Cab-1 Remote Controller Numeric Keypad Commands - Lionel LionChief Plus 2.0 0-6-0T Owner's Manual

TrainMaster Command Control operations

CAB-1 Remote Controller numeric keypad commands

W
hen you press the AUX1 button on your CAB-1 Remote Controller, you turn the numeric
keypad into ten command buttons. After you press the AUX1 button, you will be able
to press any numbered button until you address a different product. The corresponding
RailSounds sound system effects are in italic type.
Stops and resets the locomotive. Resets the locomotive's direction to forward.
Press and hold AUX1 and 0 for at least 3 seconds to hear coal being loading. Refueling
sequence.
Raises the overall master volume of the LEGACY RailSounds sound system. To
independently adjust the level of the background sounds only (e.g., the chuffing and steam
hiss), tap AUX1 and then this key. Sound volume increases.
When adjusting the overall volume, you'll hear a single bell hit that gets louder or softer
with each volume adjustment. When the volume is at maximum, additional button
presses have no effect and won't play the bell. When adjusting the background sounds
(AUX1, then a volume key) you'll hear the volume change without a single bell hit.
Engineer begins radio dialog, dispatcher replies.
At stop, hold down to hear sounds of water filling. While moving, hold down to hear water
injector sounds. Water injector/water tower sounds.
25