The Warning Sound Controller; The Speed Bar - Lionel LionChief Plus 2.0 0-6-0T Owner's Manual

LEGACY controller operations
Warning Sound Controller
Warning sounds are an important part of Lionel Railroading. Your
LionChief Plus 2.0 locomotive features a whistle/horn with 5 different
selectable pitch levels. Blow the whistle by pulling down on the Warning
Sound Controller.
Your LionChief Plus 2.0 locomotive features a bell with 5 different
selectable pitch levels. Press the Warning Sounds Controller up to turn
the continuous bell on. Press up again to turn it off.
Note!
Your LionChief Plus 2.0 locomotive features customizable
whistle and bell sounds available through your CAB-2 or CAB-1
remote control systems. Simply press the AUX 1 button followed
by the whistle or bell and your locomotive will cycle through
the available bell and whistle sounds. This feature is similar to
the pitch slider options found in the LionChief Bluetooth app.

The Speed Bar

The Speed Bar is used to select a new
touch-screen Icon Control set. This set of
touch-screen keys is used to select prototypical
preset speeds. The speed of the engine changes
with each press and release of a different Preset
Speed key.
• Tap a key, and your locomotive will
immediately begin moving to that speed.
You can also use the Velocity Throttle and
other action controls in this mode and continue
to use Preset speeds at the same time.
Press AUX1 to leave the Preset speed mode
and return to the Standard Control Panel.
Press the speed bar to toggle between the Speed
Control Panel and the Standard Control Panel.
12