Cirrus Logic CRYSTAL LAN CS890 Technical Reference Manual page 70

This test requires that each of two sta-
tions have a CS8900 card installed and
have Diagnostics/Network Test program
running. The user first sets one station
to run Responder, and then sets the other
station to run Initiator.
The Responder stays in a loop to wait
for a frame to arrive, and then sends
back the same frame if the frame was
received OK. The Initiator also stay in a
70
CS8900 Technical Reference Manual
loop that keeps feeding frames to the
network and at the same time receiving
frames back from the responder. The
total number of frames received and
transmitted are displayed on the screen,
along with a count of the number re-
ceived/transmitted OK and the number
received/transmitted in error. The test
can be terminated anytime by the user at
either side.
AN83REV1