Fault Messages - Husqvarna AUTOMOWER 435X AWD Operator's Manual

Error icon Description
The product has stopped because of low bat-
tery.
The product has stopped because of a block-
age to the cutting system.
The product has stopped because of a tem-
porary electronic or firmware problem.
The product has stopped because of an acti-
vated alarm.
The product has stopped because of the
wrong PIN code.

6.3 Fault messages

The table below shows a number of fault messages that may be shown in Automower
can be confirmed in the Automower
44 - Troubleshooting
®
Connect and some the message needs to be confirmed in Automower
Action
Refer to the error message "Empty Battery"
Fault messages on page 44 .
in
Examine the blade disc and its adjacent
area. Remove grass or other objects that can
cause blockage to the cutting system.
Switch off/on the product. If the problem con-
tinues, contact your local Husqvarna repre-
sentative.
Restart the product. The settings for the
alarm are in the security menu in Automow-
®
er Connect app.
Enter the correct PIN code. If the PIN code is
forgotten, use the link in the app to send to
PIN code to your registrated e-mail adress. If
you have not registrated the e-mail adress
contact your local Husqvarna representative.
® Connect. Some of the errors
1404 - 006 - 05.01.2021
®
Access