INFOSEC UPS SYSTEM E4 Pro One Series User Manual page 59

11: Reserved

Interface
12: Hot standby function enable/disable

Interface
13: Battery voltage adjustment

Interface
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 10 19 AA AA 205 28
Reserved
Setting
Reserved
Setting
Parameter 2: HS.H
Enable or disable Hot standby function. You may choose following
two options in Parameter 2:
YES: Hot standby function is enabled. It means that the current
UPS is set to host of the hot standby function, and it will restart
after AC recovery even without battery connected.
NO: Hot standby function is disabled. The UPS is running at
normal mode and can't restart without battery
Setting
After it shows "13" in parameter 1, please press "Enter" key first.
Then, you may choose Add or SUB to adjust battery voltage in
parameter 1 by pressing "Up" or "Down" key. After pressing
"Enter" key to confirm your selection, it will jump to parameter 2
to set up the value.
Parameter 2: the voltage range is from 0V to 5.7V, the default
value is 0V.
59