Ingersoll-Rand 41 Series Maintenance Information
Air screwdrivers and angle wrenches
Hide thumbs
Also See for 41 Series:
- Product information (12 pages) ,
- Maintenance information (8 pages) ,
- Product information (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for Ingersoll-Rand 41 Series
Summary of Contents for Ingersoll-Rand 41 Series
- Page 1 16575292 Edition 2 December 2013 Air Screwdrivers and Angle Wrenches Series 41 Maintenance Information Save These Instructions...
- Page 2 Product Safety Information WARNING • Failure to observe the following warnings, and to avoid these potentially hazardous situations, could result in death or serious injury. • Read and understand this and all other supplied manuals before installing, operating, repairing, maintaining, changing accessories on, or working near this product.
- Page 3 NOTICE Removal of Thrust Race (82) releases six Balls (87). 9. Remove Thrust Race, releasing Six Balls. 10. Remove Retaining Ring (89) and then rotate Driven jaw to remove twelve Balls (86). Separate driven jaw and spindle (84), releasing eleven Balls (86).
- Page 4 Assembly General Instructions 1. Always press on the inner ring of a ball-type bearing when installing the bearing on a shaft. 2. Always press on the outer ring of a ball-type bearing when pressing the bearing into a bearing recess. 3.
- Page 5 NOTICE Assemble Spacer with groove facing gearing. 12. Coat Throttle Rod (21) with Ingersoll Rand No. 10 Oil and insert into Rotor. 13. Assemble gearing, Clutch Assembly and Right-Angle Assembly on tool. Assembly of the Gearing 1. Assemble Spacer (37) and Bearing (38) into Ring Gear (36) or (49), pressing on outer race of Bearing. 2.
- Page 6 3. Install Bearing (100) on Pinion, pressing on inner race of Bearing. 4. Assemble Pinion and Components in Housing, pressing on outer race of Bearing. NOTICE Lock Nut (99) has left-hand threads. 5. Install Lock Nut on Housing, securing Pinion. 6.
- Page 7 Notes:...
- Page 8 ingersollrandproducts.com © 2013 Ingersoll Rand...
Need help?
Do you have a question about the 41 Series and is the answer not in the manual?
Questions and answers