Ingersoll-Rand 41 Series Maintenance Information
Air screwdrivers
Hide thumbs
Also See for 41 Series:
- Product information (12 pages) ,
- Maintenance information (8 pages) ,
- Product information (17 pages)
Related Manuals for Ingersoll-Rand 41 Series
Summary of Contents for Ingersoll-Rand 41 Series
- Page 1 16575284 Edition 1 May 2006 Air Screwdrivers Series 41 Maintenance Information Save These Instructions...
- Page 2 WARNING Always wear eye protection when operating or performing maintenance on this tool. Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. Note: When reading the instructions, refer to exploded diagrams in Parts Information Manuals when applicable (see under Related Documentation for form numbers).
- Page 3 Pistol Grip Housing 3. To remove Roll Pin or Bushing, press thru to reverse 1. Remove End Cap (32) and O-Ring (33), releasing Spring valve cavity. (34) and Valve Rod (35). 4. To remove Trigger (44) or Button (46), Drive Pin (40) out 2.
- Page 4 4. Assemble gears to shafts of mating spindle. 9. Assemble Spring (90) and Guide (89) to Spindle, 5. Assemble Carrier Assembly to Spindle Assembly of securing with Retaining Rings (88). Install Clutch Spring double reduction gearing. Install Spindle(s) and gearing (87).
- Page 5 Notes...
- Page 6 Notes...
- Page 7 Notes...
- Page 8 www.irtools.com Ingersoll Rand © 2006 Company...
Need help?
Do you have a question about the 41 Series and is the answer not in the manual?
Questions and answers