Features; Table 4. Product Feature Set Matrix - ADTRAN 6540 Installation And Maintenance Manual

Features

Table 4
Physical Description
Net Housing: 5.3 cm (2.1 in.) H x 23.6 cm (9.3 in.) W x 16.8 cm (6.6 in.) D
Front Panel Recessed Pushbuttons (4 total)
PORT SELECT
LOCAL LOOP/ERR INJ
REMOTE LOOP
BERT
Front Panel Tri-Color LED Indicators (Always Eight Total)
Left to Right
Order
LED 1
LED 2
LED 3
LED 4
LED 5
LED 6
LED 7
LED 8
Rear Panel
SHDSL Port (RJ-45 135 ohms, TNV-3 rated)
G.703 E1 Port (RJ-45 120 ohms, SELV rated)
Optional G.703 E1 Port (RJ-45 to BNC 75 ohms through external adapter,
ADTRAN P/N 1225002L1)
G.703 E1 Port (BNC, 75 ohms, SELV rated)
Nx64k Port X.21 (DB-15 female / ISO 4903, SELV; V.11 electrical)
Nx64k Port V.35 (M34 Winchester 34-pin female / ISO 2593. SELV rated; V.35,
V.28 electrical
Nx64k Port V.36 using the V.35 (34-pin male) to V.36 (ISO 4902 37-pin female) 12
inch adapter cable, ADTRAN P/N 1225004L1; V.11, V.10 electrical
Local Management Port (DB-9 female, SELV; V.28 electrical)
AC Power (IEC-320 power receptacle)
61230001E1-5E
is a matrix of product features for the five versions of the SHDSL 2-Wire/4-Wire NTU.

Table 4. Product Feature Set Matrix

Label
SHDSL
G.703
Nx64k
SPN PWR
RTS/C
DC PWR
RLSD/I
PRGM
LLOOP
RLOOP
BERT
Function
SHDSL Port Status, Test Select, Alarms
G.703 Port Status, Test Select, Alarms
Nx64k Port Status, Test Select, Alarms
Span Power Status
Nx64k Port RTS/C Status
Local DC Power Status
Nx64k Port RLSD/I Status
Firmware Programming Status
Local loopback test status for selected port
Remote loopback test status for selected
port
BERT for selected port/service
Introduction
Model Number
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • • •
•
• • • •
•
• • • •
•
• • • • •
• • • • •
• • • • •
• • • • •
• • •
• • •
• • • • •
• • • •
• • • •
• • • •
• • • •
• • • • •
5