ADTRAN 6540 Description

Product P/N: 1230001E1
D
ESCRIPTION
The AC Powered 6540 SHDSL 2-Wire/4-Wire NTU (P/N
1230001E1) functions as an interface between the SHDSL network
and the Data Terminal Equipment (DTE).
The 6540 supports applications such as LAN-to-LAN bridging,
Frame Relay circuit, and PABX termination.
The 6540 is designed to be used either as a remote unit to the
ADTRAN Total Access 3000 multiservice platform, or as a pair of
®
units in a point-to-point limited distance campus configuration,
with one 6540 configured to "LT" mode.
F
EATURES
The 6540 supports the following features:
•
Housed in a standalone plastic case
•
Provides four front panel recessed pushbuttons, and eight
front panel LED indicators
•
Provides rear panel SHDSL, G.703, and/or Nx64K ports, and
a local management port
•
Provides a rear panel connection for local AC power
•
Provides bad splice protection using the ADTRAN
proprietary Runtime TScan™ 2.0 splice protection feature (for
more information on this feature and how to locally manage
TScan, refer to the SHDSL NTU, 2-Wire/4-Wire Product Series
Installation and Maintenance Guide, P/N 61230001E1-5).
LED I
NDICATORS
Label Status Description
SHDSL Off Unit is powered off
Green Port is trained; no active alarms
Yellow
Port is trained with a minor active alarm
Red
Port is attempting to or is trained with a major
alarm
6540 NTU 2-Wire/4-Wire
AC Powered
SHDSL G.703
(2)
SHDSL
6540 Front Panel
Nx64K
X.21
V.35/V.36
CONTROL V.28
6540 Rear Panel
Label Status
G.703 Off
Green
Yellow
Red
NX64K Off
Green
Red
RTS/C Off
Green
RLSD/I Off
Green
LLOOP Off
Yellow
Red
RLOOP Off
Yellow
Red
BERT Off
Green
Yellow
Red
1. Minor SHDSL port alarms: CRC errors, Loop Attenuation Threshold Alarm, SNR
Margin Threshold Alarm, Segment Anomaly, and any ES, SES, UAS, CVC, and
LOSWS 15-Minute Threshold Alarm
2. Major SHDSL port alarms: LOS, LOSW, or Segment Defect
(1)
3. Minor G.703 port alarms: Rx RAI, Frame Slip, CRC-4 errors, LBER, and any ES,
SES, UAS, and CVC 15-Minute Threshold Alarm
4. Major G.703 port alarms: LOS, LOF, LOMF, Rx AIS, or HBER
5. Nx64K port alarms: Clock Slip, Loss of External Clock, FIFO Underflow/Over-
flow, and Inactivity Alarm
jobAid
Issue Date: September 2011
Document P/N: 61230001E1-22C
Express 6500 Series
100-240VAC 50/60Hz 100mA
Description
Port is not active
Active Port with no active alarm
Active Port with a minor alarm
Active Port with a major alarm
Port is not active
Active Port with no active alarm
Active Port with an active alarm condition
Nx64K port is not active or when active, V.35/
V.36 "Request To Send" or X.21 "Control" line
from the DTE is off
V.35/V.36 "Request To Send" or X.21 "Con-
trol" line from the DTE is on
Nx64K port is inactive or when active, V.35/
V.36 "Receive Line Signal Detector" and X.21
"Indication" control line from the NTU is off.
V.35/V.36 "Receive Line Signal Detector" or
X.21 "Indication" control line from the NTU
(DCE) is on
Local Loop is not active
Active Local Loopback on the selected port
Active Local Loop on one or more ports or ser-
vices (when no port is selected)
Remote Loop is not active
Active Remote Loopback on the selected port
(when determined via established EOC)
Active Remote Loop on one or more ports or
services (when no port is selected)
BERT is not active
Active BERT and the test pattern detector is
synchronized with no received bit errors
Active BERT and one or more test pattern bit
errors have been received
Active BERT but the test pattern detector is
not synchronized
(3)
(4)
(5)
1