Light-Me Function; Light-Me Function Behaviour On The Basis Of The Led Backlighting Mode - Comelit Simplebus1 UT1010 Technical Manual

Light-me function

Thanks to this function, button backlighting is only enabled on the user's request, by pressing the LIGHT-ME button on the
audio/video module; this saves energy and reduces light pollution.
Backlighting management for this button depends on the twilight sensor setting. It is in AUTO mode by default: the LEDs light
up at night and switch off during the day. It can be set to ON (LEDs always on) or OFF (LEDs always off).

Light-me function behaviour on the basis of the LED backlighting mode

BUTTON
BACKLIGHTING
OFF mode
[code 158]
ON mode
[code 159]
AUTO mode
[code 160]
26
With Light-Me function enabled
[code 163]