Adjusting The Brightness Of The Button Leds - Comelit Simplebus1 UT1010 Technical Manual

Adjusting the brightness of the button LEDs

Take note of the DIP-switch
settings
1
cod. 161
ON
1
1 2 3 4 5 6 7 8
4
5
Press a button repeatedly for each module to change the individual brightness of the buttons
S1 S2
6
LL
2
Set the brightness control function (code 161) and press the
confirm programming button.
2
Reset the configuration of the
DIP-switches
7
S1 S2
3
When programming is
complete, make sure the
button configuration is
correct (single/dual), see
"Configure button type
(single/dual)")
25