Emerson Daniel Ultrasonic 3410 Series Instructions Manual page 72

Communication/Output settings
July 2019
Table B-1: Communications/output settings summary table
Output Type
Digital Output 2B
Frequency Output 1B
Frequency Output 2A
Frequency Output 2B
Analog Input 1
Analog Input 2
Analog Output 1
Analog Output 2 (HART Capable)
Enter the results of the 3400 Summary Table of Communications/output settings in the
table below as a quick reference to setup the 3410 Series meter configuration parameters.
Table B-2: Communications/output settings summary table results
Output Type
Serial Port A
Serial Port B
Serial Port C
Digital Output 1A
Digital Output 1B
Frequency Output 1A
Digital Output 2A
Digital Output 2B
72
(1)
Upgrade kit instructions
(continued)
(Check electronics switch settings and circle
appropriate box for each output)
Not Used TTL (if S9-2 Open
(if J5-2 not is set to Collector (if
used) TTL) S9-2 is set
to OC)
Not Used TTL (if S8-4 Open
(if J5-1 not is set to Collector (if
used) TTL) S8-4 is set
to OC)
Not Used TTL (if S9-3 Open
(if J5-6 not is set to Collector (if
used) TTL) S9-3 is set
to OC)
Not Used TTL (If S9-4 Open
(if J5-5 not is set to Collector (if
used) TTL) S9-4 is set
to OC)
Not used (if Source (if Sink (if S12
J12-1 not S12 is set is set to
used) to SRC) SINK)
Not Used Source (if Sink (if S13
(if J12-3 S13 is set is set to
not used) to SRC) SINK)
Not Used Source (if Sink (if S14
(if J11 not S14 is set is set to
used) to SRC) SINK)
Not Used Source (if Sink (if S15
(if J10 not S15 is set is set to
used) to SRC) SINK)
Enter communications and output settings
3410 Series Electronics Upgrade kit instructions
P/N 3-9000-784