Update Commands; Mifare Commands; Mifare Commands - Examples - B&R Industries Panel PC 2100 User Manual

Software • RFID command set
Command Description
Echo_Off Suppresses the input echo for the output (default)
Startup Displays the startup message
Life Life command --> Returns OK
Helpme Displays a list of all commands

10.2.6 Update commands

Command Description
Restart Restarts the reader
Firmware_Update Switches the µC to X-modem update mode
Firmware_Upgrade Switches the µC to USB mass memory update mode
Firmware_Info Displays information about the current firmware

10.2.7 MIFARE commands

Command Description
Read Reads a 16-byte block from PICC
Read_Blocks Reads the specified range of blocks from PICC
Write Writes a 16-byte block to PICC
Decr Takes the value of the source value block, subtracts the
specified value and writes the result to the destination
block
Incr Takes the value of the source value block, adds the
specified value and writes the result to the destination
block
Restore Copies a value block
InitZero Initializes a value block with the value 0
Store_Key_EEPROM Stores a 6-byte key in EEPROM
Store_Key_Temp Stores a 6-byte key in the µC temporarily until switched
off
Connect Connects manually to a specific tag
Disconnect Automatically restores a connection to the best tag
Key_CMD Sends a key directly with each command (default)
Key_EEPROM Uses the key from EEPROM
Key_TEMP Uses the temporary key

10.2.8 MIFARE commands - Examples

Writing data to block 5 with key A from the reader's EEPROM sector 0:
write,a,0,5,0123456789ABCDEF0123456789ABCDEF
Response:
Command write ->
Data in sector 1 Block 5 written=0123456789ABCDEF0123456789ABCDEF
Reading from block 5 with key A from the reader's EEPROM sector 0:
read,a,0,5
Response:
154
Parameter 1
--
--
--
--
Table 129: General commands
Parameter 1
--
--
--
--
Table 130: Update commands
Parameter 1
"A" or "B"
"A" or "B"
"A" or "B"
"A" or "B"
"A" or "B"
"A" or "B"
"A" or "B"
"A" or "B"
6-byte key
4-byte SNr
--
--
--
--
Table 131: MIFARE commands
Parameter 2 Parameter 3 Parameter 4
-- -- --
-- -- --
-- -- --
-- -- --
Parameter 2 Parameter 3 Parameter 4
-- -- --
-- -- --
-- -- --
-- -- --
Parameter 2 Parameter 3 Parameter 4
See table "Ac- Source block --
cess
rights" (para-
meter 2).
See table "Ac- Starting block Ending block
cess
rights" (para-
meter 2).
See table "Ac- Destination 16-byte data in
cess block hex 00h
rights" (para-
meter 2).
See table "Ac- Source block Destination
cess block
rights" (para-
meter 2).
See table "Ac- Source block Destination
cess block
rights" (para-
meter 2).
See table "Ac- Source block Destination
cess block
rights" (para-
meter 2).
See table "Ac- Destination --
cess block
rights" (para-
meter 2).
Sector for key 6-byte key
in reader's
EEPROM
-- -- --
-- -- --
-- -- --
-- -- --
-- -- --
-- -- --
Panel PC 2100 swing arm user's manual V1.00
Parameter 5
--
--
--
--
Parameter 5
--
--
--
--
Parameter 5
--
--
--
Value
Value
--
--
--
--
--
--
--
--