Terminal Block For The Button/Switch Interface; 0Tb1210.3100; General Information; Order Data - B&R Industries Panel PC 2100 User Manual

Accessories • Terminal block for the button/switch interface

2 Terminal block for the button/switch interface

2.1 0TB1210.3100

2.1.1 General information

This 2-row, 10-pin TB1208 terminal block is used to connect to the button/switch interface of the Automation Panel
9xD as well as to the interfaces on various interface options.

2.1.2 Order data

Model number Short description
Terminal blocks
0TB1210.3100 Connector - Female 10-pin - Cage clamp - Protected against
vibration by the screw flange

2.1.3 Technical data

Product ID
General information
Certification
CE
cULus
Terminal block
Note
Number of pins
Type of terminal clamp
Cable type
Distance between contacts
Connection cross section
AWG wire
Wire end sleeves with plastic covering
Solid wires
Fine strand wires
With wire end sleeves
Electrical characteristics
Nominal voltage
Nominal current
1)
1) The limit data for each I/O module must be taken into consideration.
166
Table 140: 0TB1210.3100 - Order data
Table 141: 0TB1210.3100 - Technical data
0TB1210.3100
Yes
Yes
Nominal values according to UL
10 (female)
PUSH IN cage clamp connector
Only copper wires (no aluminum wires!)
3.5 mm
26 to 16 AWG
0.14 to 1 mm²
0.14 to 1.5 mm²
0.14 to 1.5 mm²
0.14 to 1.5 mm²
300 V
10 A
Panel PC 2100 swing arm user's manual V1.00
Figure