Software • RFID command set
10.5 Updating firmware
Firmware can be updated with a terminal program (e.g. RealTerm, TeraTerm, etc.). Since HyperTerminal is no
longer supported beginning with Windows 7, Tera Term is recommended.
Complete the following steps to update the firmware:
• Enter the command "firmware_update".
• Select the firmware update file (e.g. HyperTerminal -> Transfer -> Send file -> Select file).
• Send the file.
• Wait for the update to complete.
• Wait for the reader to restart.
• Wait for the information to be verified.
• The update is completed.
This appears as follows in the terminal program:
160
Figure 92: Terminal view 1
Figure 93: Terminal view 2
Panel PC 2100 swing arm user's manual V1.00