Interface Options; 5Accif01.Fpls-000 - B&R Industries Panel PC 2100 User Manual

3.4 Interface options

Information:
Please note that not every interface option can be installed in interface slots IF1 and IFx. For more
information, see "IF option slot (IF1, IFx)" on page 34.
Information:
Interface options can only be installed and replaced by B&R.

3.4.1 5ACCIF01.FPLS-000

3.4.1.1 General information
The 5ACCIF01.FPLS-000 interface option is equipped with a POWERLINK and RS232 interface.
• 1x POWERLINK interface managing or controlled node
• 1x RS232 interface
• 32 kB FRAM
• Compatible with the APC2100 and PPC2100
3.4.1.2 Order data
Model number Short description
Interface options
5ACCIF01.FPLS-000 Interface card - POWERLINK - RS232 - 32 kB FRAM
Optional accessories
Terminal blocks
0TB1210.3100 Connector - Female 10-pin - Cage clamp - Protected against
vibration by the screw flange
3.4.1.3 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the complete system. The data specifications for the complete system take
precedence over those of individual components.
Product ID
General information
LEDs
B&R ID code
Certification
cULus
cULus HazLoc Class 1 Division 2
Controller
FRAM
Interfaces
COM
Quantity
Type
Execution
UART
Max. baud rate
POWERLINK
Quantity
Transmission
Type
Execution
Transfer rate
Cable length
Terminating resistors
Electrical characteristics
Power consumption
Panel PC 2100 swing arm user's manual V1.00
Table 58: 5ACCIF01.FPLS-000 - Order data
RS232, modem-capable, not electrically isolated
Max. 100 m between two stations (segment length)
Table 59: 5ACCIF01.FPLS-000 - Technical data
Technical data • Individual components
Figure
5ACCIF01.FPLS-000
L2, L3
0xE540
Yes
LISTED 2P61 ABCD BR T4
32 kB
1
10-pin, male
16550-compatible, 16-byte FIFO
115 kbit/s
1
100BASE-TX
Type 4
1)
Shielded RJ45
100 Mbit/s
No
1.75 W
73