Installation; Drivers; Special Considerations, Limitations; Supported Display Resolutions - B&R Industries Panel PC 2100 User Manual

Swing arm device
Table of Contents

Advertisement

Software • Windows Embedded Standard 7
Function
Windows Explorer shell
Registry filter
Internet Explorer 11.0
Internet Information Service (IIS) 7.0
Anti-malware (Windows Defender)
Add-ons (Snipping Tool, Sticky Notes)
Windows Firewall
.NET Framework 3.5
32-bit and 64-bit
Remote Desktop Protocol 7.0
File Compression Utility
Windows Installer Service
Windows XP mode
Media Player 12
DirectX
Multilingual user interface packs in the same image
International components and language services
Language pack setup
Windows Update
Windows PowerShell 2.0
BitLocker
AppLocker
Tablet PC support
Multi-touch support
Boot from USB flash drive
Accessories
Page file
Number of fonts

4.5 Installation

B&R preinstalls Windows Embedded Standard 7 on a suitable CFast card (32-bit: minimum 16 GB, 64-bit: minimum
16 GB). The system is then automatically configured when it is switched on for the first time. This procedure takes
approximately 30 minutes, with the device being rebooted a number of times.
Information:
If Enhanced Write Filter (EWF) should be used, all mass storage devices should be disconnected from
the system during installation or SYSPREP (except for the boot drive). It is also possible to disable
additional mass storage devices in BIOS.

4.6 Drivers

All drivers required for operation are preinstalled along with the operating system. If an older version of a driver is
still being used, its latest version can be downloaded and installed from the B&R website (www.br-automation.com).
It is important that Enhanced Write Filter (EWF) is disabled for this.

4.7 Special considerations, limitations

Information:
32-bit operating systems are not recommended for system units with 4 GB or more of main memory.
More information can be found in the section "Miscellaneous configuration" on page 124 under "PCI
MMIO size".

4.8 Supported display resolutions

In accordance with Microsoft requirements, Windows Embedded Standard 7 requires XGA resolution (1024 x 768)
or higher in order to allow unimpeded operation of the Windows user interface (including system dialog boxes and
apps, etc.). A lower resolution can be selected for applications.
140
Windows Embedded Standard 7
Table 122: Device functions in Windows Embedded Standard 7
Windows Embedded Standard 7 Premium
-
-
-
-
Configurable
-
-
-
-
Configurable
134
Panel PC 2100 swing arm user's manual V1.00
-
Configurable
Configurable
134

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents