Installation - B&R Industries Panel PC 2100 User Manual

Software • B&R Automation Device Interface (ADI) - Control Center
Supports the following systems:
• Automation PC 510
• Automation PC 511
• Automation PC 620
• Automation PC 810
• Automation PC 820
• Automation PC 910
• Automation PC 2100
• Panel PC 300
• Panel PC 700
• Panel PC 725
• Panel PC 800
• Panel PC 900
• Panel PC 2100
• Power Panel 100/200
• Power Panel 300/400
• Power Panel 500
• Mobile Panel 40/50
• Mobile Panel 100/200
• Connected Automation Panel 800
• Connected Automation Panel 900

6.2 Installation

A detailed description of the Control Center can be found in the integrated help system. The B&R Automation
Device Interface (ADI) driver (also contains Control Center) is available at no charge in the Downloads section of
the B&R website (www.br-automation.com).
1. Download and unzip the .zip archive.
2. Close all applications.
3. Run the Setup.exe file (e.g. double-click on it in Explorer).
Information:
The ADI driver is already included in B&R images of embedded operating systems.
If a more current ADI driver version exists (see the Downloads section of the B&R website), it can be
installed later. It is important that Enhanced Write Filter (EWF) is disabled for this.
144 Panel PC 2100 swing arm user's manual V1.00