Sata Configuration - B&R Industries Panel PC 2100 User Manual

1.6.7 SATA configuration

BIOS setting Function
Chipset SATA Option for configuring SATA support
Chipset SATA mode Option for configuring supported serial ATA con-
nections
SATA port 0 hot plug capa- Option for configuring hot plugging for SATA in-
bility terface 0
SATA port 1 hot plug capa- Option for configuring hot plugging for SATA in-
bility terface 1
Panel PC 2100 swing arm user's manual V1.00
Figure 79: Advanced - SATA configuration
Configuration options
Table 105: Advanced - SATA configuration
Software • BIOS options
Effect
Enabled Provides support for SATA devices
Disabled No support for SATA devices
IDE Uses the serial ATA hard drive as a parallel ATA
physical drive. It is not possible to configure the
SATA port.
AHCI The AHCI setting enables the internal memory
driver for SATA functions, which increases the
storage performance for random read-write ac-
cess by allowing the drive itself to determine the
sequence of commands.
Enabled Enables hot plugging for SATA interface 0. De-
vices can be connected/disconnected during
operation.
Disabled Disables hot plugging for SATA interface 0
Enabled Enables hot plugging for SATA interface 1. De-
vices can be connected/disconnected during
operation.
Disabled Disables hot plugging for SATA interface 1
123