Adjusting The Display Brightness - B&R Industries Panel PC 2100 User Manual

6 Adjusting the display brightness

1. Open the Control Center in the Control Panel.
2. Select the Display tab.
3. Select a panel from the list. Only the local display (PP Link) and connected panels are shown in the list.
4. Set the desired brightness using the slider control.
Information:
Changes to these settings are displayed online but are only applied by the system (and applied during
the next restart) if the Control Center is closed with OK.
The configured brightness is separate from the value configured in BIOS Setup, i.e. the value in BIOS
is used until Windows boots. The value from BIOS is only applied the first time the Control Center is
launched.
Panel PC 2100 swing arm user's manual V1.00
Figure 54: Adjusting the display brightness
Installation • Adjusting the display brightness
97