National Instruments DAQ X Series User Manual page 294

Index
NI USB-6351/6361, A-13, A-14, A-18,
A-24
NI USB-6353/6363, A-20
NI USB-6356/6366, A-25
RTSI connector, 3-5, 9-5
pins, default, 7-47
position measurement, 7-23
buffered, 7-25
power
+5 V, 3-3
connector, PCI Express disk drive, 3-4
power-up states, 6-23, 8-7
prescaling, 7-51
programmable
function interface (PFI), 8-1
power-up states, 6-23, 8-7
programmed I/O, 10-2
programming devices in software, 2-10
programming examples (NI resources), C-1
pulse
encoders, 7-25
generation for ETS, 7-40
train generation, 7-31
continuous, 7-34
pulse-width measurement
implicit buffered, 7-7
single, 7-6
PXI
and PXI Express, 10-3
clock, 10-3
clock and trigger signals, 9-8
trigger signals, 10-3
triggers, 9-8
PXI Express
and PXI, 10-3
chassis compatibility, 10-3
clock, 10-3
clock and trigger signals, 9-8
considerations, 10-3
PXIe_CLK100, 9-8
X Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PXIe_SYNC100, 9-8
PXIe-DSTAR<A..C>, 9-9
PXI_CLK10, 9-8
PXI_STAR
filters, 9-9
trigger, 9-9
PXIe_CLK100, 9-8
PXIe_SYNC100, 9-8
PXIe-DSTAR<A..C>, 9-9
Q
quadrature encoders, 7-23
R
range, analog input
MIO X Series devices, 4-2
real-time system integration bus, 9-4
reciprocal frequency measurement, 7-15
reference clock
10 MHz, 9-3
external, 9-2
referenced single-ended connections
using with floating signal sources
MIO X Series devices, 4-19
when to use with floating signal sources
MIO X Series devices, 4-14
when to use with ground-referenced
signal sources
MIO X Series devices, 4-21
related documentation, xviii
retriggerable single pulse generation, 7-33
routing
analog comparison event to an output
terminal, 11-5
clock, 9-1
digital, 9-1
RSE configuration
MIO X Series devices, 4-19
I-12 ni.com