National Instruments DAQ X Series User Manual page 264

Analog Output
I am seeing glitches on the output signal. How can I minimize it?
When you use a DAC to generate a waveform, you may observe glitches on
the output signal. These glitches are normal; when a DAC switches from
one voltage to another, it produces glitches due to released charges. The
largest glitches occur when the most significant bit of the DAC code
changes. You can build a lowpass deglitching filter to remove some of these
glitches, depending on the frequency and nature of the output signal. Visit
ni.com/support
Counters
How do I connect counter signals to my X Series device?
The
information about counter signal connections.
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
for more information about reducing glitches.
Default Counter/Timer Pinouts
B-3
Appendix B Troubleshooting
section of Chapter 7, Counters, has
X Series User Manual