National Instruments DAQ X Series User Manual page 288

Index
CtrnSampleClock, 7-45
custom cabling, 2-7
D
DACs, 5-1
DAQ
hardware, 2-1
system, 2-1
DAQ-6202, 2-2
DAQ-STC3, 2-2
data
acquisition methods
Simultaneous MIO X Series devices,
4-44
generation methods, 5-3
transfer methods
DMA, 10-1
programmed I/O, 10-2
USB Signal Stream, 10-2
data acquisition methods
MIO X Series devices, 4-9
Simultaneous MIO X Series devices, 4-44
DC coupling, connections (Simultaneous MIO
X Series devices), 4-49
Declaration of Conformity (NI resources), C-2
default
counter terminals, 7-47
NI-DAQmx counter/timer pins, 7-47
pins, 7-47
desktop use, 1-5
device
information, A-1
multiple synchronization, 9-3
NI 6320, A-2
NI 6321/6341, A-5
NI 6323/6343, A-8
NI 6351/6361, A-12
NI 6353/6363, A-16
NI 6356/6366, A-22
NI 6358/6368, A-27
X Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
pinouts, 1-8
self-calibration, 1-2
specifications, 1-8
DI change detection, 6-24
DI Sample Clock signal, 6-6
di/SampleClock, 6-6
diagnostic tools (NI resources), C-1
DIFF connections
using with floating signal sources (MIO X
Series devices), 4-15
using with ground-referenced signal
sources (MIO X Series devices), 4-22
when to use with floating signal sources
(MIO X Series devices), 4-13
when to use with ground-referenced
signal sources (MIO X Series devices),
4-20
differential analog input, troubleshooting, B-1
differential connections
for ground-referenced signal sources
Simultaneous MIO X Series devices,
4-48
for non-referenced or floating signal
sources
Simultaneous MIO X Series devices,
4-49
using with floating signal sources
MIO X Series devices, 4-15
using with ground-referenced signal
sources
MIO X Series devices, 4-22
when to use with floating signal sources
MIO X Series devices, 4-13
when to use with ground-referenced
signal sources
MIO X Series devices, 4-20
digital
waveform acquisition, 6-5
waveform generation, 6-16
I-6 ni.com