Point; Imageproperties Object; Image Properties; Rect - Cognex DataMan Communications And Programming Manual

Property
s integer
ns integer

Point

Point is the ordered pair of integer x- and y-coordinates that defines a point in a two-dimensional plane.
Property
x integer
y integer

ImageProperties Object

The following tables list the details of the ImageProperties object, its types and properties.

Image Properties

Properties of a captured image.
Property
integer
index
FoV

Rect

Rect
RoI
integer
exposureTime
gain integer
boolean
autoExposure
boolean
illEnabled
integer
illIntensity
extillEnabled boolean
integer
extillIntensity
targetBrightness integer
focusLength integer
integer
setupIndex
array of boolean The state of the input lines when the trigger was started.
inputStates
filterTime integer
integer
creationTime
integer
creationTicks
ptpTimeStamp ptpTimeStamp
integer
id
Rect
Rect describes the width, height, and location of a rectangle.
Property Type
integer
top
bottom integer
integer
left
integer
right
Type
Image acquisition timestamp sec property.
Image acquisition timestamp nanosec property.
Type
This value specifies the x coordinate.
This value specifies the y coordinate.
Type
The index of the image within the trigger.
The Field of View, the area of image sensor used relative to the top left sensor
corner. The details of the Rect property type are listed in the Rect table below.
The Region of Interest, the part of the FoV that is actually used, relative to the
sensor. The details of the Rect property type are listed in the Rect table below.
The exposure time in microseconds.
The camera gain.
True if automatic exposure is used.
True if internal illumination is enabled.
The internal illumination intensity.
True if external illumination is enabled.
The external illumination intensity.
The target brightness in case of automatic exposure.
The focus value in millimeters. It is 0 if NA.
The current index of read setup.
The duration of filtering in milliseconds.
Creation time.
Encoder ticks corresponding to image creation time.
PtP image acquisition timestamp.
The numerical identifier of this image.
This specifies the top value relative to the top left sensor corner.
This specifies the bottom value relative to the top left sensor corner.
This specifies the left value relative to the top left sensor corner.
This specifies the right value relative to the top left sensor corner.
DataMan Application Development
Description
Description
Description
Description
31