3.
Detach the NFC module cable (3) from the top cover/keyboard. (The NFC module cable is attached to the
top cover/keyboard with double-sided adhesive.)
4.
Remove the NFC module cable.
Reverse this procedure to install the NFC module cable.
NFC module
To remove the NFC module, use this procedure and illustration.
Table 5-10
NFC module cable description and part number
Description
NFC module
NOTE:
The NFC module cable is available in the Cable Kit, spare part number M20833-001.
Before removing the NFC module, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the NFC module:
1.
Detach the NFC module cable (1) from the top cover/keyboard. (The NFC module cable is attached to the
top cover/keyboard with double-sided adhesive.)
2.
Disconnect the cable from the ZIF connector on the system board (2).
Preparation for disassembly on page
Bottom cover on page
Battery on page
36).
35).
Component replacement procedures
Spare part number
M16045-001
35).
51