2N IP Verso Manual page 6

Set-up of a 2N door station with a PEAKnx touch panel
6.
Under "Phone Number (ID)", enter the name for the door intercom system that you
have assigned to the system in the Fritzbox.
7. Under "Domain", enter the IP address of the Fritzbox (registrar).
ж
You can also find your login data and registrar (Registration server) under fritz.
box > Telephony devices, if you edit the created door intercom system and switch
to the "Login
8.
Place a check mark at "Use Authentication ID".
9.
Under "Authentication ID" and "Password", enter the authentication name and the
password which you have assigned for the 2N door station in the Fritzbox.
10. Under "Proxy Address" enter the IP address of the Fritzbox (registrar).
11. For the "Proxy Port" the 5060 is assigned by default in the Fritzbox.
12. Place a checkmark at "Registration enabled".
13. Enter again the IP address and port of the Fritzbox under "Registrar Address" and
"Registrar Port".
14.
Click on "Save".
6
data" tab.