Flow of Coating Operations
This section describes the flow of basic coating operations.
NOTE
•
Before using the Coating functions, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
Machine," in the Reference Guide.)
- Entering characters from the touch panel display (See Chapter 2, "Basic Operations," in
the Reference Guide.)
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
•
If you are using a login service, log in and log out using the procedure for the login
service you are using before and after operating the machine.
- If you are using Department ID Management with the optional Card Reader-C1, see
Chapter 3,"Optional Equipment," in the Reference Guide.
- If you are using Department ID Management, see Chapter 2, "Basic Operations," in the
Reference Guide.
- If you are performing user authentication using the SSO-H or SSO login service, see
Chapter 2, "Basic Operations," in the Reference Guide.
•
To cancel all settings, press
1
Press [Coating].
.
Flow of Coating Operations
1
1-5