Canon imagePRESS C1+ Manual page 49

● If you want to select a nonstandard paper size:
❑
Press [Irreg. Size].
❑
Press [X] (horizontal axis)
❑
Press [Y] (vertical axis)
❑
Press [OK].
You can also press a size key in which a paper size is registered ([S1] to [S5]),
instead of entering a value.
NOTE
To recall a paper size from a size key ([S1] to [S5]), it is necessary to register a
paper size in that key beforehand. For instructions on registering a paper size, see
Chapter 4, "Customizing Settings," in the Reference Guide.
❑
Press [Next].
❑
Select the desired paper type
If the desired paper type is not displayed, press [Detailed Settings]
the paper type from the list
If you are coating the back side of the paper, press [2nd Side of 2-Sided
Page].
The paper size/type currently loaded and the paper size/type reserved to be
loaded are displayed, as shown on the screen below.
➞
enter a value.
➞
enter a value.
➞
press [OK].
➞
press [OK].
Paper Size/Type Selected
Paper Size/Type
Currently Loaded
Detailed Information
➞
select
2-15
Reserving Jobs
2