5
2
6
7
2-16
Reserving Jobs
NOTE
If there is more than one reserved job waiting to print, only the last paper size/type
specified for the reserved print job is shown on the Paper Select screen.
Press [Done].
This completes the settings for reserving a print job using the stack bypass. The
subsequent steps show you how to start coating and load paper into the stack
bypass.
Press [Start Coating].
When it is time for the reserved coating job to be coated, load
the specified paper into the stack bypass.
NOTE
•
The specified paper size/type is displayed on the screen when it is time for the
reserved coating job to be coated.
•
Make sure to load the same paper size and type selected in step 4 into the stack
bypass. Coating does not start if paper of a different size or type is loaded.